how to plaster a wall (first coat)

img_20170120_144633

start with a bare wall, loose material removed, brushed down and lightly wetted .

img_20170120_150622

apply plaster around the edge like a frame ; i got the left hand one flat then some horizontal ribs to project the levels to the other side, then complete the right screed

img_20170120_154600

fill in the blank areas bring level with the frame. This is only the first coat but it is brought level, if it isn’t what is the point? After trowelling I went over it with a couple of straight edges; one long, one short – up and down and side to side sawing movement across the surface just to take off the high spots.

img_20170120_160148

key with a comb ready for the next coat, which will be easy as this is already more or less level, some shrinkage will cause this first coat to be less level than it was at the start, this wont crack because there is enough hair in it to stop that but it will still shrink.

So there you have it, a very small bit of wall I know but the principles are the same all the time, get the plaster level with the first coat not the second, the second coat just brings the plaster to the correct depth. If your first coat is not level what was it’s purpose?

 

Advertisements

About byrnesurfaces

conserver and repairer of historic surfaces
This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s